Chapter 3 BIOS Setup
CPC-3813CLD3N
- 21 -
SATA Port0 ~ 5 dynamically detect whether there are SATA devices on motherboard.
If devices are connected with the corresponding ports, then it will display the SATA
device type. Otherwise, it will display “Not Present”.
Serial-ATA Controller 0
Switch for Serial-ATA Controller 0, sets the mode for Serial-ATA Controller 0.
Serial-ATA Controller 1
Switch for Serial-ATA Controller 1, sets the mode for Serial-ATA Controller 1.
USB Configuration
Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc.
Advanced
USB Configuration
USB Devices:
1 Keyboard, 1 Mouse, 2 Hubs
Legacy USB Support [Enabled]
→←
: Select Screen
↑↓
: Select Item
Enter: Select
+/-: Change Opt
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
Version 2.00.1201. Copyright (C) 2009,American Megatrends, Inc.
Legacy USB Support
This option is used to support legacy USB devices (keyboard, mouse, storage
device, etc). When it is set to Enabled, the USB devices can be used in the OS
that does not support USB, such as DOS. When it is set to Disabled, the legacy
devices cannot be used in the OS that does not support USB.
Note: USB can be used in EFI application, such as in Shell.
