Tilt & Roll axis are locked.
Pan axis rotates smoothly with turn of wrist.
Use thumbstick up and down to control tilt of camera.
Tilt, Roll and Pan axis are locked.
Use thumbstick up and down to control tilt of camera.
Use thumbstick left and right to manually pan camera left/right
Roll axis is locked. Pan and Tilt axis smoothly follow handle. Use thumb-
stick left and right to adjust the pan angle.
Single click thumbstick to exit into previous mode.
Note: upon exiting this mode the camera tilt angle and horizon angle
will remain locked in last position.
Use the gimbal in portrait mode by rotating
the handle left or right past 45 degrees until
the handle is 90 degrees flat to the horizon.
The camera will automatically begin rotating in
the direction of the handle. Use this mode for
live facebook streaming or for vertical frame
panorama shots.
To use the gimbal inverted continue to rotate
the handle around until the handle is in the
upright position. The camera will continue to
follow until it is upside down level with the
horizon.
For additional information and video tutorials on switching between
modes and their intended uses please go to EVOGimbals.com
Roll
Motor
Tilt
Motor
Pan
Motor
OVERVIEW
Your SP-PRO gimbal comes
pre-programmed with 4 differ-
ent shooting modes for ultimate
creativity.
Please make note of each motor
as shown in diagram to the right.
You can also view ourtutorial
videos online to further under-
stand the differnt operating
modes.
OPERATING MODES
PAN FOLLOW MODE - 1 CLICK
LOCK MODE - 1 CLICK
PAN & TILT FOLLOW MODE - 2 CLICKS
PORTRAIT & INVERTED MODE
