EVN smarthome cube, Operating Manual

Page: 16 / 24

16
6. Teaching-in Components
In order to enable communication between Components,
the devices have to be taught-in to one another.
Devices are taught-in on the Cube with the user-friendly
PC software.
7. Power supply
The Cube draws its power supply from the plug-in main
adapter included in the scope of supply.
•
Plug the USB main adapter supplied into a socket
outlet.
•
Connect the Cube and the main adapter with the USB
cable. Use the USB port on the side of the device (2) for
this purpose.
Alternatively, power can be supplied to the Cube
via the USB port on a computer or a router. Please
note that in the case of some models, the USB volt-
age is no longer available once the device has been
switched off.
If the power supply to the Cube is interrupted, the
thermostats in the rooms continue to regulate the
temperature independently. The Cube serves solely
as the interface to the Software, to a Eco Switch and
as a central data store.
Attention: To avoid damaging the device, please
only use the original main adapter supplied with the
device for the power supply.