7
z
Copy (new) monitor EDID
:
When using a monitor (EDID compliant) for display, the
Unit’s
EDID Copy function will enable the EDID communication
between the monitor and
Unit
for optimal video quality. Users
can achieve this EDID communication by following the
instructions below:
Step 1.
Connect the monitor (EDID compliant) to the VGA Port
on the Unit and power on the monitor.
Step 2.
Press the button “EDID Copy” and release the button
RIGHT AFTER the LED flashing green. (3~4 sec)
Step 3.
The power LED lighting steady GREEN indicating that
the EDID Copy is completed.
Otherwise, if the LED flashes RED, it means that
a. The monitor is not properly connected
b. The monitor is not powered on
c. EDID data of the monitor is not applicable
Please repeat Step2 to 3 again
.
