4
------------------- Installation
Before the installation
z
Prior to the installation, ensure to power off all devices that will
be connected to this system.
z
Ensure that all devices you will connect are properly grounded.
z
Place cables away from fluorescent lights, air conditioners, and
machines that are likely to generate electrical noise.
z
The extender pair requires only a single power supply, which can
be plugged in at either end of the link.
Transmitter
1. Connect one end of the VGA (Audio) cable to the VGA (Audio) port on
the source device (e.g. PC or DVD player)
2. Connect the other end of the cable to the VGA (Audio) port of the Unit
3. Basically the Transmitter is power-free operation and it draws little
power from Receiver Unit (except EDID Copy processing)
(Video+ Audio Type requires power supply on both ends)
Receiver
1. Plug monitor’s VGA cable into the VGA port on the Unit
Plug speaker’s audio cable into the audio port on the Unit
2. Use a CAT5 Cable for the connection between the Transmitter Unit
and the Receiver Unit.
3. Connect the provided power cord into an appropriate power source
and plug the opposite end into the power connector on the
Unit
. The
POWER
LED on the top panel of the
Unit
illuminates GREEN
indicating the power ON.
NOTE
: To improve video quality over long distance, try using a
screwdriver to adjust the video quality
