EVISTR VOICE RECORDER
Page - 17 - of -18 -
sensitivity, only a very low decibels or quiet speaking could be picked up.
Also, at the same time, during recording, you could press the
VOL+/VOL-
to adjust the microphone
sensitivity, this will also affect voice activated sensitivity.
9) Press REC, it not recording
First check, the recording light blink or not
Second, can you see VOX on the screen
If so, it will only records when loud enough decibels sound detected, we can go to record setting,
find AVR sensitivity, and adjust it. It helps. But we suggest you could turn off the AVR mode.
10) Memory is full
When press REC, it doesn’t record, it shows “memory is full”, that means the voice recorder memory
is full.
Although you may not record too long. Maybe there is some files that cannot be read by the
recorder, so you cannot find directly from the recorder
So connecting to computer and backup important files, after that format the recorder from your
computer directly
11) How to use the A-B repeat function
During playback,
press A-B
, you will see
A
on the screen, and
B
is blink, it selected the start point
Press A-B
again, select point
B
Now it will playback between Point
A to B
NOTE:
exit A-B repeat, just press A-B button again, it will exit
12) LOCK, No Button Works
Press & hold the
A-B
button to unlock
13) The recording is noise
Don’t record near computer, electric fans, air conditioner, sound bar that will easily cause noise, the
recorder will pickup this statics noise
14) It suddenly shows delete file
When tapped ERASE button at the left side, it will enter delete mode.
