Evinrude FHL115, Operator'S Manual

Page: 48 / 62

Maintenance -
45
START ASSIST CIRCUIT FUSE
The start assist circuit provides extra voltage to the
fuel injectors during cranking.
Be sure that all active and spare fuses are in good
condition.
Always carry spare fuses.
Fuse Failure
A blown starter assist circuit fuse will not allow the
engine to crank. Replace it with a fuse of the same
rating.
Repeated failures of fuse indicate a serious prob-
lem. Do not replace it with higher rated fuse; see
your Dealer for service.
Fuse Replacement
Remove cover; install good fuse of the same rating.
IMPORTANT: Failure to install cover securely will
cause electrical problems.
SPARK PLUGS
IMPORTANT: The spark plugs should be serviced
by an Evinrude Dealer to insure correct orientation
of the spark plug to fuel injector. Incorrect spark
plug maintenance can lead to engine damage. Re-
fer to
Engine Maintenance and Inspection
Schedule .
WARNING
The ignition system presents a serious
shock hazard. The primary circuit operates
in excess of 250 volts; the secondary circuit
operates in excess of 25,000 volts. Use cau-
tion to avoid injury from shock or injury
resulting from your reaction to shock. Do
not handle primary or secondary ignition
components while the engine is cranking or
running.