IE-SNC-Tx5xx-03
19
Global settings
Contact your network administrator to get the correct values of the IP address, mask,
gateway. Entering incorrect values can cause the device be not found in the network or other
complications!
Sensor IP:
setting of the IP address of the device.
Gate IP:
setting of the internet gateway. The value need not be entered if the device will operate
only in a local network.
Netmask:
setting of the network mask of your network.
Example:
mask
no. of bits
255.255.255.252 2
255.255.255.0 8
255.128.0.0 23
Configuration password:
change of the access password for telnet.
Sensor name:
The description of the device (it is possible to change it if needed). This description
is displayed on WWW pages and in subjects of sent e-mails. Its maximum length is 32 characters.
E-mail settings- SMTP configuration
Sending warning e-mail:
Enabling of sending warning e-mails after alarm activation.
SMTP IP:
setting of an IP address of the SMTP server. Correct setting is required for the device to
be able to send e-mails . Contact your network administrator to get the correct address.
recipient 1-3:
e-mail addresses of warning e-mail recipients.
Send test email:
In case of confirmation a test e-mail is sent to the specified addresses.
