EVGA SuperNOVA 1050W GOLD, User Manual

Page: 3 / 20

850W / 1050W GOLD Power Supply User Manual 850W / 1050W GOLD Power Supply User Manual
SuperNOVA 850W GOLD SuperNOVA 1050W GOLD
Introduction: Unrivaled Performance
Introducing the EVGA SuperNOVA 850G/1050G power supply. This power supply raises the bar with 850W/1050W
of continuous power delivery and 90% efficiency. A fully modular design reduces case clutter and 100% Japanese
Capacitors ensures that only the absolute best components are used. This gives you the best stability, reliability,
overclockability and unparalleled control. The EVGA SuperNOVA 850G/1050G is the ultimate tool to eliminate all
system bottlenecks and achieve unrivaled performance.
Safety Information
Included with your EVGA 850G/1050G power supply offers the following items for proper installation and
optional testing:
What’s in the Box
WARNING: This unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will
void the products warranty. EVGA will not be responsible for any result of improper use, including but not limited to,
any use of the product outside of its intended purpose or use inconsistent with the warranty terms available online.
(Warranty information is available at
www.evga.com/support/warranty and this manual is available at
www.evga.com/manuals ).
850G 1050G
(1) EVGA Power Supply
(1) EVGA Manual
(4) Mounting Screws
(1) EVGA PSU Tester
(24-pin)
(1) EVGA Cable Bag
(1) 20+4 pin ATX Cable
(2) 4+4 pin EPS12V
CPU Cables (4) 6+2 pin + 6+2 pin
PCI-E VGA Cables
(3) 4 SATA cables
(1) 3 Molex cable
(1) 2 Molex cable + 1 Floppy
(1) Power Cord cable
(optional) (1) EVGA Power Supply
(1) EVGA Manual
(4) Mounting Screws
(1) EVGA PSU Tester
(24-pin)
(1) EVGA Cable Bag
(1) 20+4 pin ATX Cable
(2) 4+4 pin EPS12V
CPU Cables (4) 6+2 pin + 6+2 pin
PCI-E VGA Cables
(2) 6+2 pin PCI-E VGA Cables
(4) 4 SATA cables
(1) 3 Molex cable
(1) 2 Molex cable + 1 Floppy
(1) Power Cord cable
(optional)
STABLE POWER
The SuperNOVA Gold series has outstanding electrical performance with
ultra stable voltage
and
extremely clean
power output . This can help you achieve the highest possible overclock (optional) and provide the most stable and
reliable power to all components. The SuperNOVA Gold series also provides up to 90% efficiency and is
80 PLUS GOLD certified.
DUAL THERMAL CONTROL SYSTEM
The EVGA Dual Thermal Control System provides silent operation at low loads, improved efficiency and longer life
span of the fan. Enabled by a simple switch directly on the power supply, the “No Fan Spin” feature is ideal for
users looking to reduce ambient noise overall. Save on energy costs and unnecessary fan usage with the EVGA
Dual Thermal Control System.
TOP QUALITY PROTECTIONS
The SuperNOVA GOLD series comes equipped with the most comprehensive protection set possible, including
Over Voltage Protection
(OVP) , Under Voltage Protection (UVP) , Over Power Protection (OPP) , Short Circuit
Protection (SCP) , Over Current Protection (OCP) , Over Temperature Protection (OTP) . This product is also covered
by an exceptional 5-year warranty and EVGA’s legendary customer service and support.
SUPERIOR BUILD QUALITY
The SuperNOVA GOLD series is built to the highest standards, using
100% Japanese capacitors
rated at 105
degrees Celsius and high quality brand-name semiconductor components for the highest performance and reliability.
The Ultra Quiet 135mm
Teflon Nano-Steel Bearing fan provides adequate cooling to allow near silent operation
when not needed and proper cooling during heavy load operation.
MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures with better airflow overall and provide a clean look to
any system. Fully Modular PSU designs allow the user to disconnect the cable from the power supply side if they
are not needed for the specific configuration. This can help
free up space
inside the case and
improve cable
management as well as airflow throughout the system. EVGA offers fully modular designs on all GOLD series and
include a cable storage bag in case you plan to upgrade or add more components for storage.
Installation
1. Remove the power supply from its packaging.
2. (Optional) Using the provided PSU testing tool, connect the 24pin cable to the
PSU, then attach the testing tool to the 24pin cable. Connect the ATX power cable
to the PSU and plug the PWR cable into the outlet or surge protector/UPS you plan
to use. Once connected, turn the power switch to the ON position. (If the ECO mode
is set to ON, the fan will not spin)
Please note: If you are using a water cooling configuration, this testing tool
provides a simple, safe, option for bleeding/draining/testing water cooling
components without the need of a paperclip or other device.
Features
(4) 6+2 pin + 6+2 pin
PCI-E VGA Cables
(2) 6+2 pin PCI-E VGA Cables
(4) 4 SATA cables
(1) 3 Molex cable
(1) 2 Molex cable + 1 Floppy
(1) Power Cord cable
(optional)
English English
2 3