EVGA Z390 DARK (131-CS-E399)
- 11 -
1.
M.2 Key-M Socket3 110mm (PM1)
a.
WHITE: M.2 can be used.
2.
Multifunction POST Indicator
a.
During boot it will cycle many different hexadecimal post codes with a
range of 00-FF and this indicates what aspect of the Power On Self Test
(POST) is currently running.
i.
For a list of POST Codes, please see Page 153.
b.
This indicator can be configured in BIOS to display hardware monitoring
information, such as voltage or temperature. After boot, these LEDs will
show either temperature or voltage, depending on user configuration in
the BIOS.
3.
Memory DIMM 2 Status
a.
WHITE: DIMM detected and present
RED: DIMM/Memory has failed POST
4.
Memory DIMM 2 Status
a.
WHITE: DIMM detected and present
b.
RED: DIMM/Memory has failed POST
5.
+5V Standby Power
a.
WHITE: Voltage present (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
6.
CATERR - Catastrophic Error on the processor
a.
RED: Processor error has occurred.
b.
OFF: No error state detected in the CPU.
1.
M.2 Key-E Enabled
12.
VPLL_OC Status
23.
M.2 Key-M PM1 Enabled
2.
Multi-function POST indicator
13.
VCCST Status
24.
U.2 PU1 Status
3.
Memory DIMM 2 Status
14.
Power Button
25.
U.2 PU1 Enabled
4.
Memory DIMM 1 Status
15.
Reset Button
26.
PE2 Status
5.
+5V Standby Power
16.
BIOS 1 Active
27.
PE2 Enabled
6.
CATERR
17.
BIOS 2 Active
28.
M.2 Key-M PM2 Status
7.
VCORE Status
18.
BIOS 3 Active
29.
M.2 Key-M PM2 Enabled
8.
VDIMM Status
19.
SW Slow Mode ON
30.
PE3 Status
9.
VSA Status
20.
PE1 Status
31.
PE3 Enabled
10.
VCCIO Status
21.
PE1 Enabled
32.
PE4 Status
11.
VCCPLL Status
22.
M.2 Key-M PM1 Status
33.
PE4 Enabled
LED Legend
