manualshive.com logo in svg

EVGA 122-CK-NF67-A1, User Manual, Page: 12 / 80

Share
Download
EVGA 122-CK-NF67-A1 User Manual Download Page 12

 

4 

Networking with NVIDIA nForce  

NVIDIA networking delivers the highest network throughput at the lowest 
CPU utilization. The manageable and stable NVIDIA networking solution 
results in better networking management and a lower total cost of ownership.  
Only NVIDIA integrates this level of networking features to allow you to take 
your online experience to the next level.   

NVIDIA

 

Native Gigabit Ethernet  

The industry’s fastest Gigabit Ethernet performance eliminates network 
bottlenecks and improves overall system efficiency and performance. 

NVIDIA FirstPacket™ Technology  

Be the ‘King of Ping’ with NVIDIA FirstPacket technology.  Get the crystal-
clear phone conversations and online gaming performance you expect.  
NVIDIA FirstPacket technology assures your game data, VoIP conversations, 
and large file transfers are delivered according to preferences set by you in an 
intuitive wizard.  

TCP/IP Acceleration  

TCP/IP Acceleration delivers the highest system performance by offloading 
CPU-intensive packet filtering tasks in hardware, providing users with a PC 
networking environment that is faster.  

High Definition Audio (HDA)  

High definition audio brings consumer electronics quality sound to the PC 
delivering high quality sound from multiple channels.  Using HDA, systems can 
deliver 192 kHz/32-bit quality for eight channels, supporting new audio 
formats.

 

  

USB 2.0 

USB 2.0 is standard plug-and-play interface that provides easy-to-use 
connectivity for USB devices.

 

Summary of Contents for 122-CK-NF67-A1

















































































Reviews:

No comments