6
SPECIFICATIONS
TOOL SPECIFICATIONS
MODEL
PN57(B)
PN57HD(B)
PN57PP(B)
HEIGHT
11.1" (283 mm)
11.6" (294 mm)
11.6" (294 mm)
WIDTH
5.2" (131 mm)
5.2" (132 mm)
5.2" (132 mm)
LENGTH
10.6" (270 mm)
10.6" (268 mm)
10.6" (268 mm)
WEIGHT
5.7 lbs. (2.6 kg)
5.9 lbs. (2.7 kg)
5.9 lbs. (2.7 kg)
RECOMMENDED
OPERATING PRESSURE
70 to 120 psi (5 to 8 bar)
LOADING CAPACITY
300~350
300~350
225~300
AIR CONSUMPTION at
90 psi (6 bar) pressure
0.021
ft
3
(0.6 liter/cycle)
0.028
ft
3
(0.78 liter/cycle)
0.028
ft
3
(0.78 liter/cycle)
FASTENER SPECIFICATIONS
MODEL
PN57(B)
PN57HD(B)
PN57PP(B)
NAIL LENGTH
1" - 2-1/4" (25 - 57 mm)
1-1/4" - 2-1/4" (32 - 57 mm)
SHANK DIAMETER
.083" - .090" (2.1 - 2.3 mm)
.099" - .113" (2.5 - 2.9 mm)
HEAD DIAMETER
.197” - .224” (5.0 – 5.7 mm)
.224” - .283” (5.7 – 7.2 mm)
SHANK TYPE
Smooth, Ring, Screw
COLLATION
15
°
Wire
TOOL AIR FITTING
This tool uses a 1/4”-18 N.P.T. or 1/4”-19 P.T. male plug. The inside diameter should be .200” (5 mm) or larger. The
fitting must be capable of discharging tool air pressure when disconnected from the air supply.
OPERATING PRESSURE
70 to 120 psi (5 to 8 kg/cm
2
). Select the operating pressure within this range for best fastener performance.
DO NOT
EXCEED THIS RECOMMENDED OPERATING PRESSURE.
TECHNICAL DATA
AIR CONSUMPTION
Tool air consumption:
PN57(B)-2.1 cfm (1.0 liter/second), PN57HD(B)-2.8 cfm (1.3 liter/second), PN57PP(B)-2.8
cfm (1.3 liter/second)
of free air to operate at the rate of 100 nails per minute, at 90 psi (6.0 kg/cm2). Take the actual
rate at which the tool will be run to determine the amount of air required. For instance, if your fastener usage averages
50 nails per minute, you need 50% of the tool air consumption in running at 100 nails per minute.
NOISE
A-weighted single-event sound power level LWA, 1s:
PN57(B)-106.48,
PN57HD(B)/PP(B)-110.3 dBA.
A-weighted single-event emission sound pressure level at work station LpA 1s,d:
PN57(B)-103.8,
PN57HD(B)/PP(B)-105.7 dBA
These values are determined and documented in accordance to EN12549.
VIBRATION
Vibration characteristic value:
PN57(B)-2.35, PN57HD(B)/PP(B)-3.00 m/s
2
These values are determined and documented in accordance to ISO 8662-11.
This value is a tool-related characteristic value and does not represent the influence to the hand-arm-system
when
using the tool. An influence to the hand-arm-system when using the tool will, for example, depend on the
