The food processor is designed to be small and exquisite, and of a durable quality. No matter what you
want to make-soup, mayonnaise, baby food, milk shake and so on, using these machines can make things
very easy and fast.
The machine is very easy to clean. It can provide your daily life with a lot of comforts and convenience.
BEFORE CONNECTING TO POWER
Before connecting to the power, please check whether the type of supply and the mains voltage match
with the details given on the rating label on the appliance.
Using for the first time
Rip off all wrapping paper and plastic bags. Clean the fittings. (Refer to Cleaning Method)
Knowing your food processor
SAFETY GUIDANCE
General
• Special cares need to be paid when preparing food for a baby, an elderly or a patient. Before using the
machine, you should be sure that the muddler has been completely sterilized and the sterilization has
been under the disinfector maker’s instructions.
• Do not touch the chopping blade when connecting to power.
• Keep your fingers, hair, clothes and other objects a distance from the machine when it is still rotating.
• Pull the plug off when changing fittings or after use.
• Do not mix hot oil or other oily ingredient.
• Avoid children or other people who do not know the operation of this machine to use it, unless they are
under proper instruction. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their
safety.
• Do not dip the handle into water or damp the cable, in case you will get an electronic shock. Children
should be supervised to ensure that they do not play with the appliance.
• Do not put the cable on a hot surface or hang if from the kitchen table. Your children can be hurt when
they are trying to drag the cable and turn down the machine.
• If the supply cord is damaged, it must be replaced by the manufacture of its service agent or a similar
qualified person in order to avoid a hazard.
• Do not continuously operate the machine, the motor will overheat. Or turn off the switch every 1 minute,
and let the motor cool down at least 1 minute. The motion could not be more than 3 cycles. More motion
should be done after the motor cool down. If not, the motor may damaged.
• Switch off the appliance and disconnect from supply before changing accessories or approaching parts
that move in use.
• Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
• Using the machine, do not operate the blender without dip into the food. Do not operate the machine
over 20 seconds when the blender is unloaded. Avoid damage the motor from overheat.
Switch key
• The first gear is for slow moving, the second gear is for fast moving. Press the switch key, the machine
will work. Loosen the switch key, the machine will stop.
Chopper
• Do not touch the sharp chopping blade.
• Do not open the upper lid until the chopping blade is completely stopped moving.
• Do not work the chopper more than 2 minutes, and continue operate this part when the motor is cool
down.
• Before cleaning the container, make sure that the chopping blades have been taken out.
【
Processor
】
(1) Step-less speed control knob
(2) Switch button “
Ⅰ
”
(3) Turbo button “
Ⅱ
”
(4) Main body
(5) Stainless steel rod
【
Attachments
】
(6) Whisk
(7) 700ml Chopper
(8) 700ml Measure cup
USING THE BLENDER
The blender is used for mince or mix the food.
Move the hot pan away from fire and wait until its temperature drop down to be below 70C. To avoid the
housing overheated.
Set the blender on the housing, screw tightly and lock it.
Connect to power. To avoid spattering, put the blender into ingredients before switching on the power.
Hold the mixing cup tightly and push down the switch key. The liquid ingredients you are mixing cannot
submerge the juncture of the blender.
Move the blender downwardly and upwardly.
After use, please pull out the plug and disassembly the fitting.
The rev of the blender is 13000RPM. Not allowed to continuously use more than 1 minute.
Always disconnect the blender from the supply if it is left unattended and before assembling, disassem-
bling or cleaning.
Do not allow children to use the blender without supervision.
USING THE WHISK
Whisk can be used to beat small amount of food, such as egg white, cream, instant desert, beaten eggs,
sponge cake etc.
Do not try beat too stiff or solid ingredients such as butter or sugar. The whisk can be damaged.
1.Set the whisk into the connector.
2.Fix the gear-box into the handle. Screw tightly and lock it.
3.Connect to power. To avoid spattering, please put the whisk into ingredients before switching on the
power.
Hold the mixing cup tightly and push down the switch key. The liquid ingredients you are mixing cannot
submerge the juncture of the whisk. Don’t put more than 500 ml of water when mixing in the mixing cup.
4.After use, pull out the plug and disassembly the fittings.
5.The rev of the whisk is 1120 RPM. Not allowed to continuously use the whisk more than 2 minutes.
USING THE 700 ML CHOPPER
Do not touch the sharp chopping blade.
Do not open the upper lid until the chopping blade is completely stopped moving.
Do not work the chopper more than 2 minutes, and continue operate this part when the motor is cool
down.
Before cleaning the container, make sure that the chopping blades have been taken out.
The chopper can be use on meat, cheese, vegetable, vanilla, bread, biscuit, nut let etc… Do not use it on
ingredients that are extremely hard, such as coffee bean, ice cube, spice or chocolate. They may damage
the cutter.
Take bones out of meat and cut it into small pieces of 1-2cm size. In most, it can put 500g meat into it at a
time.
Set the chopping blade on the middle bar in the container.
Put ingredients in.
Cover the lid. Screw tightly and lock it.
Set the handle on. Screw tightly and lock it.
Connect to power. Hold tightly of the container and then push down the switch key.
After use, pull off the plug and disassemble the fittings.
▲ Not allowed to continuously use more than 30 seconds, should cool down at least 2 minutes.
The motion could not be more than 5 cycles.
▲ To ensure the long life of your machine, not allowed to continuously use more than 2 minute.
Should cool down the motor before next operation.
USING THE SPEED ADJUSTMENT
After setting, push down the switch key “
Ⅰ
”, the machine can work. If you want to make the speed from
slowly to fast, move the speed adjustment slowly, and then the machine will work from slowly to fast.
If you want the machine work in the fastest speed, push down the switch key “
Ⅱ
”.
CLEANING METHOD
Before cleaning, please switch off power and pull out the plug.
Do not touch the sharp chopping blade.
Some ingredients, such as sugar cane, can leave pigments on the plastic surface of the container. You
can use a rag dipped with rap oil to wipe them out.
Blender, mixing cup and container
Put half glass of water into the mixing cup, put a little cleaning agent and dip then into the water, then start
the mixer.
Pull off the plug and wipe it dry.
NOISE
We hereby declared that our product have a working noise level more than 80dB(A) but less than 85dB(A).
We suggest wearing ear protection while operating the appliance.
WEEE
This product contains recyclable materials.
Do not dispose this product as unsorted municipal waste. Please contact your local municipality for the
nearest collection point.
