Frame Manual
500FR 3 Rack Unit Frame
500FR-4
Revision
1.4
1.4.2. Power Supply Status Indicators
Figure 1: 500PS Status Indicators
Each power supply has two status indicator LEDs. The green PSU STATUS LED indicates the health of
the local power supply. The red FRAME STATUS LED indicates the health of the entire frame and is
operated by the frame status buss of the frame. The FRAME STATUS LED will be Off under normal
conditions and On when there are Frame Status Fault conditions. See section 2 for more information
about frame status buss fault conditions.
If one of the power supplies malfunctions, (power cord disconnected, power switch is off, fuse is blown,
rear fan is stopped, etc,) then its PSU STATUS LED will go Off, and the red FRAME STATUS LED on
both power supplies will turn On. (If the power supplies are fitted with green FRAME STATUS LEDs they
will turn Off) The PSU STATUS LED on the power supply that is functioning will remain On. If the frame
is connected to VistaLINK
®
then the power supply fault will send a trap message from the frame.
If there is a fuse failure, contact Evertz customer service regarding the power
supply immediately. The power supplies are short circuit protected and should not
blow the fuse under a short circuit condition.
