evertz EMR-32x32-3G, Manual

Page: 33 / 46

EMR-32x32-3G
EMR 12G/3G/HD Router
Revision 1.2
Page 25
6. CONFIGURING THE SYSTEM USING WINSETUP
The WinSetup program is used to configure most of the routing functions, including control panel
operation. It allows such things as the number of signal levels to be defined, which control panels are
connected to the system, and the names of inputs and outputs.
The configuration of the EMR uses a special version of WinSetup. To ensure that the correct version is
used, check the
Options > System Version
menu. The correct version has the SC-500E as the only
system inside the Routing System Controller box.

NOTE: Configuration of the EMR requires a specific version of WinSetup.
WinSetup is supplied with a comprehensive help system that can be accessed by pressing F1 from any
screen. The help system can also be entered from the
Help > Index
menu. The following notes are a
very brief guide to getting started with WinSetup.
The following dialog box is the WinSetup main screen. Any part of the system can be configured from
the menu at the top of the screen. The grey bars above each main section and the line items within the
main sections can both be used for quick access to specific items.
Figure 6-1 : WinSetup Configuration Editor