manualshive.com logo in svg

evertz 7880IPG-NAT Series, User Manual, Page: 34 / 46

Share
Download
evertz 7880IPG-NAT Series User Manual Download Page 34

7880IPG-NAT Series  

High Density Network Address Translator 

 

Page - 26

 

Revision 2.1

 

 

LAN to WAN: Address Translation Configuration  

and

 

WAN to LAN: Address Translation Configuration 

NAT Cores (1-6) and Flows 1 to 128 
 

Output Mode: 

This control is used to set the output mode on the flow stream. Options are 

Pass 

Through

 or 

Modify.

 

Pass Through

 will enable the stream to pass through without making any changes 

to the headers while 

Modify 

enables changes to the headers. 

 
Source IP Address: 

This control is used in NAT mode to configure the output header with the 

desired source IP address. 

 
Source UDP Port: 

This control is used in NAT mode to configure the output header with the desired 

source UDP Port. 
 

Destination MAC:  

This control is used to enter the Destination MAC address.

 

 
Destination IP Address: 

This control is used in NAT mode to configure the output header with the 

desired destination IP address. 

 
Destination UDP Port: 

This control is used in NAT mode to configure the output header with the 

desired destination UDP Port. 

 

 

Summary of Contents for 7880IPG-NAT Series















































Reviews:

No comments