7880IPG-NAT Series
High Density Network Address Translator
Revision 2.1
Page - 23
Note:
Packet Replication
option is generated by specifying the same Input Destination IP
address for multiple flows, and is applicable in WAN-to-LAN direction and in IP-NAT mode.
Flow Configurations (IP NAT & MC-in-MC NAT Modes)
LAN to WAN: Input Flow Configuration
NAT Cores (1 to 6)
Mode:
This control allows the user to enable or disable the input associated with that flow.
Input Destination IP Address:
This control allows the user to set the Input Destination IP address of
the packets to be received.
Destination UDP Port:
This control allows the user to set the Destination UDP Port number to be
received.
Input Bit rate:
This monitor will display the bit rate of the streams that are being received in kbps.
WAN to LAN: Input Flow Configuration
NAT Cores (1 to 6)
Mode:
This control allows the user to enable
De-Encap/NAT
or disable the input associated with that
flow. Only when in MC-in-MC mode, the module will de-encapasulate.
Input Destination IP Address (also used for Packet Replication):
This control allows the user to
set the Input Destination IP address of the packets to be received.
Packet Replication
option is
generated by specifying the same Input Destination IP address for multiple flows.
Destination UDP Port:
This control allows the user to set the Destination UDP Port number to be
received.
Input Bit rate:
This monitor will display the bit rate of the streams that are being received in kbps.
