570FEC-HW-X19
Bulk 10GE FEC Encode/Decode
Revision 1.0
Page - 17
4.4.1. Input Port Control
For FEC-Tx1 to FEC-Tx32
Input Stream Alias:
This field allows the user to set the input stream alias name.
SFP Port Selection:
This dropdown allows the user to select the SFP from which each channel will
obtain their main stream.
Input IP Address:
This field allows the user to set the input IP address/multicast address that they
want to receive.
Input IP Port Number:
This field allows the user to set the input UDP port number.
Input IGMPV3 Mode:
This dropdown allows the user to select the IGMPV3 mode to use. The user can
include SSM sources or exclude SSM sources.
IGMPV3 SSM Src1-6 IP Address:
This field allows the user to set IP address to be used while forming
the source specific filter for IGMPV3 communications.
4.4.2. Input Monitor
For FEC-Tx1 to FEC-Tx32
Input RTP Present:
This filed displays if the Input RTP is present or not.
Input RTP Sequence Errors:
This field displays the Input RTP sequence errors.
Input Bit Rate Detected:
This field displays the detected input Bitrate.
Clear input Statistics:
This control allows the user to reset received IP statistics.
4.4.3. FEC Control
For FEC-Tx1 to FEC-Tx32
FEC Mode:
This dropdown allows the user to set the FEC mode which can be toggled for each stream.
FEC Column:
This dropdown allows the user to set the FEC column.
FEC Row:
This dropdown allows the user to set the FEC row.
4.4.4. Output IP Control
For FEC-Tx1 to FEC-Tx32
IP Output Enable:
This parameter allows the user to enable or disable IP output.
IP Output Source IP Address:
This parameter allows the user to set the IP address for IP output
source.
IP Output Source UDP Port:
This parameter allows the user to set the IP output source UDP port.
IP Output Destination IP Address:
This parameter allows the user to set the IP address for IP output
destination.
IP Output Destination UDP Port:
This parameter allows the user to set the IP output destination UDP
port.
IP Output Time To Live:
This parameter allows the user to set the IP output time to live.
IP Output DSCP:
This parameter allows the user to set the IP output DSCP.
