evertz 570ACO-X19-10G Series Quick Reference Manual Download Page 46

Page: 46 / 52

570ACO-X19-10G Series

Quick Reference Guide

Page - 36

Version 1.0

4.16. NOTIFY
4.16.1. Board Notify

In this section users can set the trap Board Fault and Refernce Loss

Figure 4-46: WebEASY

- Notify/ Board Notify

Board Trap:

This control allows to turn board traps ON or OFF.

Board Fault Present:

This indicator displays whether a fault is currently present or not.

4.16.2. Decapsulator Fault

Figure 4-47: WebEASY

- Notify /Decapsulator Fault

For 1A to 3C (refer to 4.5.1 for details)

Decapsulator Trap:

This control allows to enable or disable decapsulator traps.

Decapsulator Fault Present:

This indicator displays whether a fault is currently present or not.

4.16.3. ACS Fault

In this section, users can set the traps for PGM failover, Preview Failover, Active PGM Output Source

Change and Active Preview Output change for all three ACSs.

Figure 4-48: WebEASY

- Notify/ ACS Notify /ACS Fault

For ACS 1 to 3

ACS Traps:

This control allows the user to enable/disable ACS traps.

ACS Faults:

This indicator displays whether an ACS fault is currently present or not.

Summary of Contents for 570ACO-X19-10G Series





















































Search results

Summary of Contents for 570ACO-X19-10G Series

Reviews:

Related manuals for 570ACO-X19-10G Series

Brands by name

Popular brands

evertz 570ACO-X19-10G Series, Quick Reference Manual

Search results

Summary of Contents for 570ACO-X19-10G Series

Reviews:

Related manuals for 570ACO-X19-10G Series

Brands by name

Popular brands