2430RX2-10G Series
10G Video to HDMI/SDI Converter
Page - 8
Revision 0.1
Data Port Control
For each data port the following controls can be configured.
IP Address:
This parameter allows user to set IP Address for the data port
Netmask:
This parameter allows user to set netmask for the data port
Gateway:
This parameter allows user to set gateway for the data port
Data Port Monitor
For each data port the following parameters can be monitored.
Port Link Status:
This parameter returns the status link status for the data port, either Up or Down.
Received Data Ethernet Total Bitrate:
This parameter displays the bit rate received on this ethernet
port, units are in kbps.
Transmitted Data Ethernet Total Bitrate:
This parameter displays the bit rate transmitted on this
output ethernet port, units are in kbps.
SFP Monitor
For each SFP data port the following parameters can be monitored.
SFP Part Number:
This parameter tells about the SFP part name.
SFP Type:
This parameter returns the SFP connection type, options include RJ45, Fiber, DIN or N/A.
SFP Rx Power Level (dbm):
This parameter returns the SFP RX power level, in unit of 1 dbm. This
parameter is only available for RX class SFPs, named as Received optical power.
SFP Tx Power Level (dbm):
This parameter returns the SFP Tx power level, in unit of 1 dbm. This
parameter is only available for RX class SFPs, named as Received optical power.
SFP Temperature (Celsius):
This parameter returns the SFP temperature level, in unit of degrees.
This parameter will display a valid value when there is a fiber connection.
SFP Link Speed (Mbps):
This parameter returns the SFP link speed.
