CCTV testerPRO User’s Manual
1 . S a f e t y I n f o r m a t i o n
Notice
The tester is intended to use in compliance with the local rules of the electrical
usage and avoid to apply at the places which are inapplicable for the use of
electrics such as hospital, gas station etc.
To prevent the functional decline or failure, the product should not be sprinkled
or damped.
The exposed part of the tester should not be touched by the dust and liquid.
During transportation and use, it is highly recommended to avoid the violent
collision and vibration of the tester, lest damaging components and causing
failure.
Don’t leave the tester alone while charging and recharging. If the battery is
found severely hot, the tester should be powered off from the electric source at
once. The test should not be charged over 8 hours.
Don’t use the tester where the humidity is high. Once the tester is damp, power
off immediately and move away other cables connected.
The tester should not be use in the environment with the flammable gas.
Do not disassembly the instrument since no component inside can be repaired
by the user. If the disassembly is necessary indeed, please contact with the
technician of our company.
The instrument should not be used under the environment with strong
electromagnetic interference.
Don’t touch the tester with wet hands or waterish things.
Don’t use the detergent to clean and the dry cloth is suggested to use. If the dirt
is not easy to remove, the soft cloth with water or neutral detergent can be
used., but the cloth should be tweaked sufficiently.
Ver: STPV1.32
Page.3
.
