Customer Service Email: cseverpure
@
pentair.com
n
Technical Support Email: servicespecialist
@
pentair.com
9
WATER SPECIFICATIONS
Water used to make coffee and
espresso beverages must be
potable under local requirements
and EPA drinking water
standards, and it is recommended
to meet the attributes specified
in the following table:
Water used to make fountain
beverages and drinking water must
be potable under local require-
ments and EPA drinking water
standards, and it is recommended
to meet the attributes specified in
the following table:
Water used on inlet to steamers
or warewashers should meet
requirements as specified by the
equipment's manufacturer or
as listed in the following table:
Water used to make ice should be
potable under local requirements
and EPA drinking water standards,
and it is recommended to
meet the attributes specified
in the following table:
Water Specifications
Coffee and Espresso
Ice
Fountain and Drinking Water
Steam and Warewashing
Attribute
Specification
Turbidity
Must not exceed 0.5 Nephelometric Turbidity Units
Taste/Odor
Free from off-tastes and odors
Total Chlorine
<0.05 ppm
Iron
Not more than 0.25 ppm
Total Alkalinity
Not more than 100 ppm
Total Hardness
17 - 85 ppm
Total Dissolved Solids
70 - 200 ppm
pH
6.8 - 7.4
Attribute
Specification
Turbidity
Must not exceed 0.5 Nephelometric Turbidity Units
Total Chlorine or chloramine
< 0.2 ppm
Iron
< 0.1 ppm
Total Alkalinity
< 150 ppm
Total Hardness
< 35 ppm
Total Dissolved Solids
< 100 ppm
pH
6.5 - 7.8
Attribute
Specification
Turbidity
Must not exceed 0.5 Nephelometric Turbidity Units
Taste/Odor
Free from off-tastes and odors
Total Chlorine
<0.05 ppm
Iron
Not more than 0.3 mg/l
Total Alkalinity
Not more than 150 mg/l
Total Hardness
Not more than 100 mg/l
Total Dissolved Solids
Not more than 500 mg/l
Sulfates
Not more than 250 mg/l
Chlorides
Not more than 250 mg/l
pH
6.5 - 8.5
Attribute
Specification
Turbidity
Must not exceed 0.5 Nephelometric Turbidity Units
Taste/Odor
Free from off-tastes and odors
Total Chlorine
<0.05 ppm
Iron
Not more than 0.25 ppm
Total Alkalinity
<150 ppm
Total Hardness
< 85 ppm
Total Dissolved Solids
70 - 200 ppm
pH
6.8 - 7.4
