9
Section 1
Introduction and Specifications
Overview of Parameters and Features*
PowerMTS 211Si**
MIG/TIG/Stick Amp Range
120V: MIG 30
-
125A/ TIG 10
-
125A/ Stick 10
-
100A
240V: MIG 30
-
200A/ TIG 10
-
200A/ Stick 10
-
175A
Volt Adjustment Range MIG
120V: 15.5
-
20V 240V: 15.5
-
26V
MIG Wire Feed Speed
120V: 60
-
400 (5
-
10 m/min) 240V: 60 to 600 IPM (.5
-
15 m/min)
Input Voltage
120
-
240V Single phase (208V permissible)
Welder Type
Digitally controlled, IGBT inverter type with CV MIG, CC TIG, and CC Stick functions.
Wire Roll Size and Diameter
.023”
-
.045”
wire diameters possible with optional drive rolls.
8”
Diameter (10
-
12 lbs.);
4”
Diameter ( 1
-
2 lbs.)
Pre/Post Flow Control
(Pre) 0
-
10 Seconds/ (Post) 0
-
10 Seconds
Up/Down Slope of MIG Volts/ TIG Amps
MIG: 0
-
1 Second; TIG: 0
-
10 Seconds
Synergic MIG
Synergic MIG function for wires from
.023”
to
.045”
in diameter, with mild steel, stainless and Alumi-
num settings. Synergic feature operates via speed control on MTS version of Spool gun as well.
MIG Burn Back Timer Control
0
-
2 seconds
Inductance/Arc Force Control
0
-
100%
Memory
Saves up to 9 programs.
MIG Spot and Stitch Timer
0
-
15 Seconds
MIG Burn Back Timer
0
-
2 Seconds
Stick Hot Start Timer
0
-
2 Seconds
Stick Hot Start Intensity Control
0
-
100% over set amperage
Stick E6010, Cellulosic Capability
Not recommended, however E6011 may provide a more stable arc.
Power Cable Length
9.5 ft. (3m)
Accessories
15 Series torch 9.5 ft. (3m), Work clamp with cable 9.5 ft. (3m), 12 ft. 26 Series TIG torch
300 A Stick Torch with cable (3m), Floating ball type regulator.
*See next page for complete electrical and technical data.
**Specifications subject to change without notice.