14
EVERLAST
EVERLAST
Setup Guide and Component Identification
Section 2
CONNECTIONS AND POLARITY
MIG*
SPOOL GUN**
*For Flux
-
Core, install the work clamp in the
positive terminal and then change the wire feed-
er
’
s polarity (located under the access cover).
GUN
+
WORK
-
CONNECT TO
5/8”
CGA GAS FITTING AT REAR
STICK
WORK
-
TORCH
+
** Spool gun is an optional item that may be pur-
chased separately from Everlast.
TIG
TORCH
-
GAS
SWITCH (2T/4T)
NOTE:
In TIG mode, the user
must choose between pedal opera-
tion or torch switch operation. Both
cannot be in use at the same time.
WORK
-
CONTROL
SPOOL GUN
+
WORK
+
PEDAL