Everlast CT416, Owner'S Manual, Page: 7 / 19

Hookup and checks
1) With automatic voltage fluctuation control, this welder will function despite the input voltage exceeding
15% of the nominal voltage or a loss of up to 15% of nominal voltage.
2) If you increase the length of the leads, be aware that possible machine damage can occur with exces-
sively long leads.
3) Make sure the gas/air supply is always available for the operation (plasma or TIG) you are working
with. Connect the Argon gas supply for TIG or compressed air for plasma. Make certain the connec-
tion and pressure is correct (see about welding for more information).
4) Ground the unit with 6mm
2
(10 gauge) wire to the earth ground.
5) Connect the power cord, torch and earth ground clamp (see drawing below).
6) If you’ve followed all we have written, you should be ready to weld. Weld safely please…
Thank you for your time and support, Everlast Products.
USERS ’ MANUAL EVERLAST CT-D series - 5 -