2012
11
STEP 2
1. Mount the L&R Handle bars (7B & 7A) onto Handle bar mounting plates at the top of the
upright tubes with four 5/16” x 2” Button Head Socket Bolts (134) and four curved washers
(140).
NOTE: The L&R handlebars are different. The Right handle bar has two wires and
the switches on the handle bar say “Fast and Slow” while the Left handle bar switch
says “Up and Down”.
STEP 3
1. Install the L & R handgrip side caps (68 left, 69 right)
inside
the
console and onto the ends of
the console support with two 5/16" x 2-3/4" button head socket bolts (93) and two 8 x 23 x
1.5T flat washers (139). Ensure the side caps are oriented correctly and facing the correct
direction (see diagram). Also ensure that the wiring is fed through the side caps.
2. Place the console onto the L & R mounting brackets at the top of the upright tubes. Then
install and tighten with two 5/16
”
x 1-1/2
”
button head socket bolts (137), two 8 x 23 x 1.5T
flat washers (139) and star washers (145) through the holes at the top and front of the console
support with the combination M5 allen wrench & phillips head screwdriver (141).
