2012
17
1/4-Mile Track:
The 1/4-mile track will be displayed around the dot matrix window. The flashing dot indicates your
progress. Once the 1/4-mile is complete this feature will begin again. There is a lap counter in the
center of the track for monitoring your distance.
Pulse Grip Feature:
The Pulse (Heart Rate) console window will display your current heart rate in beats per minute
during the workout. You must use both stainless steel sensors on the front cross bar to display
your pulse. Pulse value displays anytime the upper display is receiving a Grip Pulse signal. You
may not use the Grip Pulse feature while in Heart Rate Control.
Note:
Refer to Important Safety Instructions (page 2) concerning Pulse Grip operation.
Calorie Display:
Displays the cumulative calories burned at any given time during your workout.
Note:
This is only a rough guide used for comparison of different exercise sessions, which
cannot be used for medical purposes.
Auto-Pilot feature
This unique feature allows the user to instantly enter the Heart Rate Control mode at any time with the
press of a button.
The HR2 program button also doubles as the Auto-Pilot button. During any program the user may
press the Auto-Pilot button to enter the HRC program. Your current heart rate (the heart rate you are
at when you press Auto-Pilot) will be maintained automatically by the Auto-Pilot program. You may
press the elevation/incline up or down buttons to change your target heart rate while in the Auto-Pilot
mode.
Speakers:
The console has built-in Speakers. You may Plug an Audio Source (CD player, MP3, Computer,
etc.) into the Jack on the Left side of console. There is no volume control on the console. The
volume must be controlled on the Audio Source.
Fans:
The console has a built in fan. Press the fan button to turn the fan on or off.
Handrail buttons disable switch
Just above the Stop button there is a button with a picture of the handrail switches on it
and an indicator light above it labeled Disabled. When the indicator light is lit, the
handrail switches are disabled. This allows you to use the full length of the handrails
without fear of activating the speed or elevation controls.
