Customer Service 1-888-707-1880
Or email [email protected] 13 Dyaco Canada Inc.©2015
TROUBLE SHOOTING
Problem Cause
Correction
Monitor does not
display
Batteries weak or dead
Replace batteries
No speed or distance
displays on the monitor
Sending unit not connected
Securely plug sending unit into
extension wire and the back of the
monitor
Sending unit not working
properly
Replace sending unit
Monitor not working
properly
Replace monitor
Squealing
Brake pads are worn
Replace the brake pads
Maintenance
The safety of this produce can be maintained only if regular periodic checks are made. Most checks can
be performed once a week. However some checks should be made before each workout, and are
indicated as such below.
Checks
Be sure batteries are new and electronic connection are clean and tight.
Check that seat nuts are secure, check before each workout.
Check that pedals are tight, pedals can work loose over time.
Check that stabilizer bolts are tight, check before each workout this.
Check that handlebar is secure, if not, tighten, check before each workout this.
Should a part become defective, replace it immediately. Do not allow use of the equipment until it
has been repaired.
Cleaning
Almost all surfaces are washable. A damp cloth is sufficient to clean most surfaces of this unit.
Be careful not to drip water on the monitor. A mild liquid soap may be added if needed.
Always ensure batteries are fresh and in correctly
.
