EverHot 1000/BL1, Technical Manual

Page: 36 / 46

Connection of collectors and accessories
2
For the connection of two and three
collectors to each other you must use
the bronze connecting records as shown
in diagrams. The bronze plugs
1 /
” are
connected diagonally on the collector(s).
The bronze cross, the degasser and the
sensor socket are connected to the outlet
on the highest point of the collector(s) as
shown in the photo.
In order to achieve the best contact
between the the sensor and the sensor
socket, use thermal conductive material
before connecting.
The above accessories are found in a
plastic bag which is included in the acces-
sories box.
arrangement of
connection
sensor socket No2
36
The sensor socket (1) of length
135mm is connected to the boiler,
while the small sensor socket (2)
of length 65mm is connected to
the collectors.