EZN Plus Series
7
4.
Accessing the Camera
You have to assign an IP address for your camera to be accessible. To assign an IP address to the
camera, use the
IP Utility
(IPU)
software included in the software CD. Please connect the camera in
the same LAN of your computer.
1.
Install and then start the IPU program
. The following dialog box appears.
2.
Click
Find Devices
to search the cameras connected in the LAN. The default network values of
the cameras will be displayed. By default, the network protocol of the camera is
DHCP
.
3.
To configure the network settings, select a camera and then click
Login/Multi Login
to log in.
4.
Type the user ID and password. Click
OK
.
Note:
1.
The default user ID is
user1
and the default password is
11111111
.
2.
If you select more than one camera that has the same user ID / password, you will be able
to log in several cameras at once.
5.
To change the IP address, double-click the IP Address of the camera. Type a new IP address and
then click
Set IP Address
to save the settings.
