EZN Plus Series
4
b.
If you want to wire the cables through the wall, feed the cables through the wall and
then screw the camera base to the Quick-Mounting Ring.
Camera Base
Quick-Mounting Ring
Cables
5.
Connect the network, power and other cables of the camera to the related devices. Please
refer to
2. 4-Pin Data Cable
earlier in this Quick Installation Guide.
6.
Optionally insert a micro SD / SDHC card into the card slot. Please refer to
3.2 Inserting a
Micro SD Card
later in this Quick Installation Guide.
7.
Access the camera live view. See
4. Accessing the Camera
. Or connect a handheld test
monitor to the TV-out connector on the camera module for setting image zoom and focus.
Please refer to
3.3 Adjusting Camera Focus / Zoom
later in this Quick Installation Guide.
8.
Adjust the camera angles.
Pan Adjustment:
Twist the Base Disk forcefully until it unscrews from the Lock Ring. Rotate
the camera 360° to the desired position and then screw the Lock Ring until it locks against
the Base Disk.
Base Disk
Lock Ring
360
°
Tilt Adjustment:
Loosen the Tilt Screw using the provided hexagon key and adjust the tilt
angle 90°.
90
°
Tilt Screw
Rotational Adjustment:
Loosen the Rotate Screws on both side of the camera body using
the providing hexagon key and rotate the camera 360° (180° to the left / 180° to the right).
180
°
Rotate Screw
°
°
180
°
