EverFocus EZN Series User Manual Download Page 45

Page: 45 / 86

EZN3160/3260

7.1.4

Display and Overlay

You can configure the recording path / format, source video stream and micro SD card settings on

this page.

【

Overlay Text Settings

】

Check the boxes to display the information on the Live View Window. The

information will only be displayed on the Live View Window and will not be displayed on the live

view video images nor snapshots. To change the foreground color of the text, directly click on the

box and then select a color. Select a position where you want the information to be displayed on the

Live Window. To change the Machine Name, see

Machine Name

7.1.5 System Maintenance

. To

change the day and time setting, see

7.1.2 Date / Time

. Click

Apply

to apply the changes or

Cancel

to cancel the changes and return to the previous settings.

Summary of Contents for EZN Series























































































Search results

Summary of Contents for EZN Series

Reviews:

Related manuals for EZN Series

Brands by name

Popular brands

EverFocus EZN Series, User Manual

Search results

Summary of Contents for EZN Series

Reviews:

Related manuals for EZN Series

Brands by name

Popular brands