4
5.
For the first time installation, check whether the camera is properly
focused. If not, you can manually adjust camera Zoom or Focus using
the supplied
L-Type Wrench
. On the bottom of the camera, find the
Zoom
and
Focus
nuts. Using the supplied
L-Type Wrench
to adjust
camera Zoom or Focus.
ZOOM
FOCUS
6.
You can optionally adjust camera angles. To do so, loosen the
Tilt Screw
or
Rotate Screw
on the bracket using the supplied
L-Type Wrench
to
adjust camera angles. After adjusting camera angles, tightly screw back
the Tilt/Rotate screws.
Tilt Screw
Rotate Screw
3. Configuration in the OSD Menu
You can configure camera settings in the OSD menu from DVR end.
No Main
Sub
Menu
Sub Menu / Function
1
Iris
ELC
2
Focus Adj.
Off
On
Focus Area
Wide / Narrow / Middle
DISP Tone
0-2
DISP H_POS 0-60
DISP V_POS 0-34
DISP H_Size 0-60
DISP V_ Size 0-34
3
Exposure
Brightness 0-20
