PoE Switch
19
Figure 1-10-2
Quality of Service (QoS)
In QoS Mode, select QoS Disabled, 802.1p, or DSCP to configure the related
parameters.
QoS Configuration
Strict: Services the egress queues in sequential order, transmitting all traffic in the
higher priority queues before servicing lower priority queues.
WRR: Weighted Round-Robin shares bandwidth at the egress ports by using
scheduling weights with default values of 1, 2, 4, 8 for queues 0 through 7,
respectively. (This is the default selection.)
※
Note: WRR can only be selected if Jumbo Frame mode is disabled on the Port
Configuration page
