PoE Switch
9
manage the switch. By default, all ports on the switch are members of VLAN 1.
However, if the management VLAN is changed, the management station must be
attached to a port belonging to this VLAN.
Name: Type in the new user name (The default value is ‘admin’).
Password: Type in the new password (The default value is ‘admin’).
SNMP Enabled: Enables or disables SNMP on the switch. Supports SNMP version
1and 2c management clients.
SNMP Trap Destination: IP address of the trap manager to receive notification
messages from this switch. Traps indicating status changes are issued by the
switch to specified trap managers. You must specify trap managers so that key
events are reported by this switch to your management station.
SNMP Read Community: A community string that acts like a password and
permits access to the SNMP database on this switch. Authorized management
stations are only able to retrieve MIB objects.
SNMP Trap Community: Community string sent with the notification operation.
Ports
Port Security ensures access to a switch port based on MAC address, limits the total
number of devices from using a switch port, and protects against MAC flooding
attacks.
Port Configuration
In Port Configuration, you can set and view the operation mode for each port.
Enable Jumbo Frames
:
This switch provides more efficient throughput for large
sequential data transfers by supporting jumbo frames on Gigabit Ethernet ports
up to 9.6 KB. Compared to standard Ethernet frames that run only up to 1.5 KB,
using jumbo frames significantly reduces the per-packet overhead required to
process protocol encapsulation fields.
Power Saving Mode
:
Adjusts the power provided to ports based on the length of
the cable used to connect to other devices. Only sufficient power is used to
maintain connection requirements.
Mode: allow user to manually set the port speed such as Auto, 10 half, 10 Full,
100 Half, 100 Full, 1000 Full or Disabled. User may press Apply button to complete
the configuration procedure.
