EQ610s
13
ATW (Auto Trace White Balance)
This mode can be used to view areas with a color temperature range of
1800°K to 10500°K (e.g., around fluorescent lights, outdoors, around sodium
vapor lamps or inside tunnels). Press ENTER if you want to access the ATW
setting options.
AWB (Auto White Balance)
Select this to allow the camera to automatically adjust the white balance
under all conditions.
3200K
Select this mode when the color temperature is around 3200°K (when
surrounded by sodium lights). Press ENTER if you want to access the setting
options.
6300K
Select this mode when the color temperature is around 6300°K. Press ENTER
if you want to access the setting options.
ANTI CR (Color rolling suppression)
Select
ANTI Color Rolling
mode to suppress color rolling incidents.
Follow the instructions on the screen.
Note:
The
WHITE BALANCE
can
not
function effectively under the following
conditions. When the following occurs, please select
PUSH LOCK
Mode.
<
When the color temperature in the surveillance area is high.
<
When darkness surrounds a surveillance area.
<
When there’s a fluorescent light in the surveillance area or the light
changes all the time.
MANUAL
This mode enables more precise adjustments. Increase and/or decrease the
Red Gain and Blue Gain values to suit the light in the surveillance area.
PUSH LOCK
For this mode, follow the instructions given on your screen.
To find this mode’s optimal setting for the surveillance area’s luminance
environment, point the camera towards a sheet of white paper before
entering the PUSH LOCK adjustment sequence. Press the ENTER button
while pointing the camera at the sheet. Ideally, this adjustment sequence
should be repeated whenever the luminance environment changes.
