EPTZ9200/9300 Series
5
4.
Installation
Replacing the Desiccant Bags
Before installing, replace the 3 desiccant bags inside the top housing. The desiccant bag loses its
effectiveness after you open the camera. To keep the camera’s interior dry, it is highly recommended to
replace the desiccant bags every time when you open the camera.
To replace the desiccant bags:
1.
On the Top Housing, slightly press the black plastic socket backward and lift up the base board.
2.
Remove the desiccant bags from the top housing.
3.
Stick the supplied 3 new desiccant bags inside the top housing
.
Place back the base board.
Note:
Ensure
Not
to place the desiccant bags under the position of the fan.
Fan
4.
Insert the base board into the black plastic socket. The base board should click firmly into position.
Make sure the pin connector on the base board is lined up with the pin connector on the main body
when you press the two together.
