EPN5230 / EPN5210
9
4.
Push the camera downward a little bit and you can see the micro SD card slot located on the
bottom of the camera module. Insert the micro SD card to the card slot.
Push so you can see the
bottom of the camera module
5.
This step is optional. If you want to replace new desiccant bags, place the spare (or self-prepared)
desiccant bags
in the same location as image below.
Note:
There are two desiccant bags placed inside the camera bottom module. The desiccant
bags lose their effectiveness after you open the camera. To keep the camera’s interior dry, it is
highly recommended to replace the desiccant bags every time when you open the camera.
6.
Screw back the rear camera cover and the outer ring.