EHN3200
46
5.8.4 Maintenance
Maintenance
Reboot:
The unit is rebooted without changing any of the settings. Use this method
by pressing
Reboot
button if the unit is not behaving as expected.
Restore:
The unit is restarted and most current settings are reset to the factory
default values by pressing
Restore
button. The only settings saved are:
IP setting
DDNS setting
Default:
The
Default
button should be used with caution. Pressing this button will
return all of the camera's settings, including the IP address, to the factory default
values. The camera will then have to be re-installed.
Save/Load Configuration Server
To take a backup of all of the settings in the current configurations, press
Save
to
save the configuration to a config. file. Once saved, it is then possible to return to
the previous settings if/when desired.
