EMN Series Mini Mobile IP Dome
7
c.
Place the Waterproof Ring into the LAN/PoE cable. Connect the RJ-45 cable to the Rugged
RJ-45 Connector Cable.
Waterproof Ring
Rugged RJ-45
Connector Cable
RJ-45 Cable
d.
Tightly screw the Cable Gland and Screw Cap to the Rugged RJ-45 Connector Cable.
e.
Crimp the RJ-45 connector onto the network cable. Note that the wires should be placed into
the RJ-45 connector based on the following order (from left to right).
Orange with white stripe
Orange
Green with white stripe
Blue
Blue with white stripe
Green
Brown with white stripe
Brown
6.
Optionally insert a micro SD / SDHC card to the card slot. See
No.2
in
2. Physical Description
.
7.
Access the camera live view. See
5.1 Checking the Dynamic IP Address
. Or using the supplied Video
Test-Out cable to connect a monitor to the Video Test-Out connector (see
No.4
in
2. Physical
Description
) of the camera for adjusting camera angles.
Note:
Do Not adjust camera focus yourself as it has already been adjusted (with the dome
cover on) in the factory. It is normal to see the blurry image on the live view when the camera is
connected to a monitor without the dome cover on. The live view image will be focused once
the dome cover has been put back to the camera.
Pan Adjustment:
Loosen the screw and pan the camera by ±25°.
±25°
