EverFocus EDSR 900F, Instruction Manual

Page: 76 / 108

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
72
¾
Please Note: Make sure the modem is in bridge mode. If your Internet
Service Provider is BellSouth you will have a modem/router. BellSouth
provides a Westell modem that includes a built-in router. You will need to
disable the router functionality.
¾
The next step is to open ports within your router. Open virtual ports in
the router (Log into the router using a PC)
o
EDR Ports to open: 80, 1111, 1600
o
EDSR Ports to open: 80, 1111, 2222, 3333, 4444, 6666
ƒ
Please Note: If your Internet service provider blocks port 80 you
may use a different port to access the DVR through the routers
UPNP forwarding (Linksys feature) or Virtual Server (D-Link
feature). This will be addressed in the next two chapters.
¾ If you have a Dynamic IP address and have open the ports simply go to
Chapter 9 to Configure DDNS.
¾
Once you have reached this point and you have restarted the digital
recorder.
¾ To access the DVR from a computer simply open Internet Explorer and
in the address bar type:
http:// and the IP address of your internet service provider.
ƒ
Please Note: If your Internet service provider blocks port 80 you
may use a different port to access the DVR through the routers
UPNP forwarding (Linksys feature) or Virtual Server (D-Link
feature). This will be addressed in the next two chapters.