EverFocus EDSR 400F, Instruction Manual

Page: 31 / 112

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
ƒ
Lower : 15KB
ƒ Low : 19KB
ƒ Basic : 23KB
ƒ Standard : 27KB
ƒ High : 31KB
ƒ Superior : 35KB
To change this, simply use the Jog Dial on the DVR. Press the
Enter key to make your selection.
o
Disk Full: This field represents what to do when the Hard Disk
Drive gets full. In this case the default is set to rewrite. The other
option if you wish to do so is to set the disk full option to Stop.
This will stop all recording once the drive has been filled up. You
would then have to go to System Setting Menu and do a Disk
Renew in order to format the drive and start recording again. To
change this, simply use the Jog Dial on the DVR. Press the Enter
key to make your selection.
¾ Alarm Record:
o
Operation: This field is to set the option of turning alarm
recording on or off. If Operation is turned on the DVR will
respond by recording when an alarm occurs. If Operation is
turned off the DVR will not record when an alarm occurs. Please
remember motion is an alarm. To change this, simply use the Jog
Dial on the DVR. Press the Enter key to make your selection.
o
Speed: This field represents the speed at which the recorder will be
recording during an alarm. To change this, simply use the Jog Dial
on the DVR. Press the Enter key to make your selection.
ƒ Please Note: See Appendix B to find the appropriate
speed to fit your recording needs.
o
Quality: This field is for setting up video recording quality, this
item lets you set the quality of the video picture by selecting a
compression rate.
There are six quality levels for recording:
ƒ
Lower : 15KB
ƒ
Low : 19KB
ƒ
Basic : 23KB
ƒ Standard : 27KB
26