EverFocus EDSR 400F, Instruction Manual

Page: 28 / 112

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
message. This entry is used to set the alarm duration from 1 to 99 seconds.
To change this, simply use the Jog Dial on the DVR. Press the Enter key to
make your selection.
¾
Manual Edit: This field represents manual editing of each camera for
motion. To change this, simply use the Jog Dial on the DVR. Press the
Enter key to make your selection. Use the jog dial to make your selection.
Once you have chosen the channel you would like to manually edit, press
the ENTER button. This will bring you to a new screen.
Diagram 11
¾ Diagram eleven shows a screen shot of the manually edit screen. Use the
arrow buttons to move through the squares. Initially all the squares are pink
in color signifying that these squares are set up to pick up motion. To
deselect a square simply move over the square and press the ENTER
button. Diagram twelve shows another screen shot of a manually edited
screen after editing has been accomplished.
23