EDR910_1610_ma_en_rev1
00
- 31 -
3.4 ALARM MENU
Define the dry alarm contacts’ attributes and the alarm reactions in the ALARM menu.
For alarm contact pin assignment, please refer to appendix D.
Each contact is adjusted individually and selected from the list on the left:
(1) ALARM:
ENABLE:
Contact is activated.
DISABLE:
Contact is deactivated.
(2) ALARM TYPE:
N.O.:
Normally open, contact reacts on being
connected to ground (GND). Define the
alarm duration within menu item
DURATION.
N.C.:
Normally closed, contact reacts on being
disconnected from ground (GND). Define
the alarm duration within menu item
DURATION.
N.O.+Trans
Transparent mode, similar to normally open
but: alarm is active as long as input contact
(but minimal as defined in DURATION)
N.C.+Trans
Transparent mode, similar to normally closed
but: alarm is active as long as input contact
(but minimal as defined in DURATION)
(3) ACTIVE CAMERA:
Alarm camera being recorded and displayed in full screen on the main monitor (see (10)
MAIN MONITOR). Recording is carried out according to the settings defined for EVENT
within the
CAMERA
menu.
COPY function
Alarm settings can be copied from one contact to another. Select the contact to be copied
from the contact list on the left and press the
COPY
key. The message “COPIED” appears
at the top screen margin. Select the contact which shall apply the settings from the
contact list. Press the
SEARCH
key to assign the copied settings to the contact. The
message “PASTED” appears at the top screen margin
ALARM
ALARM
1
ALARM
ENABLE
ALARM 2
ALARM TYPE
N.O.
ALARM 3
ALARM 4
ACTIVE CAMERA 01
ALARM 5
DURATION 05
SEC
ALARM 6
ALARM OUTPUT NONE
ALARM 7
ALARM EMAIL NO
ALARM 8
BUZZER
OFF
ALARM 9
ALARM NETWORK NO
SUMMARY
MAIN
MON
NO
CHANGE
CALL MON
NO CHANGE
Menu display for EDR-910, EDR1610 identical, but with 16 alarm inputs.
