EverFocus ECOR 4D Instruction Manual Download Page 30

Page: 30 / 107

4.5 Layout Change

4.5.1

Layout Change

The 4 CH ECOR DVR has a total of three display modes available, and the 8 CH ECOR has four. The

different available layouts are shown below:

(9 screens)

(4 screens)

(PIP)

(Full)

To change layout, follow the steps below:

By mouse: Right-click to bring up the menu bar and click

to switch between 9, 4, PIP and full

displays.

By front panel: Press

key to switch between 9, 4, PIP and full displays.

Notes

○

9 screen display is only available for 8 CH model

○

PIP display is not available in Playback mode

4.5.2

Bring to Full Screen Mode

By mouse: Left-click on the selected channel to put that camera in full screen mode.
By front panel: Press any channel key to bring that channel to full screen mode.

Summary of Contents for ECOR 4D












































































































Search results

Summary of Contents for ECOR 4D

Reviews:

Related manuals for ECOR 4D

Brands by name

Popular brands

EverFocus ECOR 4D, Instruction Manual

Search results

Summary of Contents for ECOR 4D

Reviews:

Related manuals for ECOR 4D

Brands by name

Popular brands