EverFocus EBN268 User Manual Download Page 34

Page: 34 / 71

EZN268

【

Video Overlay Settings

】

Check the boxes to enable displaying video title or date/time on the live

view video images. Click

Apply

to apply the changes or

Cancel

to cancel the changes and return to

the previous settings.



Show video title in video and snapshots:

Check the box to enable displaying video title on the

live view video images and snapshots. To change the title, type a name in the

Video Title

column.



Enable Video OSD:

Check the box to enable displaying date/time information on the live view

video images. Select the desired Date / Time format.



Position:

Select a position where you want the video title or date/time information to be

displayed on the live view video images.

【

Live View Layout Settings

】

Check the box if you want to show One Push button on the Live View

Window. Uncheck this box to hide the buttons. Click

Apply

to apply the changes or

Cancel

to cancel

the changes and return to the previous settings.

Summary of Contents for EBN268








































































Search results

Summary of Contents for EBN268

Reviews:

Related manuals for EBN268

Brands by name

Popular brands

EverFocus EBN268, User Manual

Search results

Summary of Contents for EBN268

Reviews:

Related manuals for EBN268

Brands by name

Popular brands