75
Search from
EVENT LIST
:
I.
Select Event Type from
Alarm
,
Motion
and
Vloss
.
II.
Press
Update
button to refresh the event list.
III.
All events of the selected type will be displaying along with Date/Time,
event type (represents by a capital letter), camera number (represents by a
number), e.g. M02 is the motion event from camera 2.
IV.
Current page and total page are shown below the event list. Press |<< for
first page, << for previous page, >> for next page, >>| for last page, or
simply input the page number, then press
GO
.
V.
Press
Play
button to playback the selected event.
Search by
Time
:
Search the starting date and time by entering
Year/Month/Date/Hour/Min/Sec
of
the happening event. Then press
Play
button to playback.
Playback by
PTZ CONTROL
:
I.
Select the PTZ camera from drop-down menu.
II.
Select
Action Mode
. 4 options are available:
Continuous
,
Step x10
,
Step
x5
and
Step x1
.
III.
Use Direction Arrows (up, down, left, right) to move/adjust the focus to your
desired direction and angle.
IV.
Press
Z+
for Zooming In or
Z-
for Zooming Out.
V.
In
Focus
option, press
Near
to move the focus closer to the subject. Or
you can move the focus farther from the subject by pressing
Far
.
VI.
You can turn on the
Iris
by pressing
Open
or turn it off by pressing
Close
.
VII.
“
Preset
” helps you to define the preset point at which you would like to see
the subject. Press
Set
for confirmation,
Clear
to exit or
Jump
to jump to a
specific point.
VIII.
“
Auto Pan
” is to define the speed of PTZ camera when moving horizontally,
please select from
Lower
,
Low
,
Middle
,
High
to
Higher
. Press
Run
for confirmation or
Stop
to exit.
