(4) DURATION:
Buzzer noise and event record duration of an alarm, from 1 sec to 99 seconds. The default value is
5 seconds.
(5) ALARM OUTPUT:
The setting of alarms which are
NONE
and
1,
where
1
means the alarm is enabled.
(6) ALARM EMAIL:
Select “
YES
” for sending an email when alarm occurs. The email address can b e set in the
NETWORK SETUP MENU
.
(7) BUZZER:
Alarm buzzer.
ENABLE
: To enable an alarm buzzer.
DISABLE
: To disable an alarm buzzer.
(8) ALARM NETWORK:
YES:
Enable alarm network.
NO:
Disable alarm network.
(9) MAIN MON:
Display on a main monitor when an alarm occurs.
NO CHANGE:
Nothing changes on the display in the main monitor when an alarm occurs.
FULLSCREEN:
A full screen will pop up when an alarm occurs.
(10) CALL MON:
Display on a call monitor when an alarm occurs.
NO CHANGE:
Nothing changes on the display in the call monitor when an alarm occurs.
SEQUENCE:
Display in the sequence mode when an alarm occurs.
ACTIVE CAMERA:
Display the active camera in full screen mode to the call monitor.
(11) SUMMARY :
Dial
Jog
to change items in the
SUMMARY
table.
All alarm’s statuses are shown in
SUMMARY
tables. These tables are for checking alarm
overall statuses, but not for setting.
Note :
Please check
APPENDIX C
to see other available alarm input / output functions.
38
