2.
After enable an event, you need to set a time zone in the
SCHEDULE SETUP MENU.
An event
recording has to be included in a scheduled time zone. You can refer to
SCHEDULE SETUP MENU
to set up a time zone which you would like to record wh en an event occurs.
3.
When the event and schedule are set, you can enter the
CAMERA SETUP MENU
to set the event
recording speed (IPS) of a camera in the time zone you s et.
Note:
You can set the time zone from 00:00 to 00:00 daily in the
SCHEDULE SETUP MENU,
and set the
normal record speed as
0 IPS
in the
CAMERA SETUP MENU
if you only need events recording
all the time.
4.4 ALARM INPUT RECORDING (Input trigger)
EDR810/410
provides a record function which is triggered by external signal via the 19
th
pin of the
ALARM
INPUT / OUTPUT
port. When the record input signal is pulled low constantly,
EDR810/410
will start to
record. The system will stop recording when the record input sig nal is not pulled low.
Note:
Please check
APPENDIX C
to see other available alarm input/output functions.
61
