EFN Series Fisheye IP Camera
18
d.
Optionally insert the additional wires, such as power (if you want to power the camera
through a 12 VDC power source), alarm and audio cables, through the other Cable Conduit.
Note that one Cable Conduit can only be inserted with one cable. The Cable Conduit has been
tested to support cable diameter between 5.3mm and 6.4mm. Please refer to the image
below to bundle the lose wires before inserting to the Cable Conduit.
e.
Tighten the Screw Cap all the way to the Adjustment Ring(s).
f.
Due to the variable cable diameters, for better waterproofing, it is strongly recommended
that you apply silicon sealants to the inner Screw Cap.
6.
Connect the PoE cable to the LAN / PoE port on the camera module.
7.
If you have inserted additional wires, connect the wires to the terminal block. Please refer to
2.1
Cables and Terminal Block
for pin assignment information.
8.
Optionally insert a micro SDHC / SDXC card to the card slot.
